Air cooled vibration test systems, A22

A series is the “new standard” in vibration testing, with a solid test performance. – A22/SA2HAM and A22/EM2HAM. Test systems provides a maximum of 3.5m/s shock velocity testing. More

Air cooled vibration test systems, A12

A series is the “new standard” in vibration testing, with a solid test performance. – A12/SA1HAM and A12/EM1HAM. A series gives good balance between specification of velocity, acceleration and displacement. More

Amplifier replacement

IMV has developed super-long life amplifiers with Integrated Shaker Manager technology which; minimizes the required electric power, cuts down electric consumption, reduce blower noise if air-cooled type shakers and have significant reliability. More

IMV Replace amplifiers

Customers wishing to take advantage of the ECO technology offered by IMV are able to upgrade their equipment through the ECO Replacement amplifier program. More

Latest addition to IMV’s A series supports manufacturers – A74

In 2016 the number of electric cars on the planet topped 2 million, with sales leaping 60% on the previous year. More

How does the IMV ECO System adjust the field power?

The IMV ECO-system controls the field current between 0% and 100%, using a power converter with a control switching frequency of over 20kHz. More

How does the IMV ECO System adjust the cooling blower speed?

The IMV ECO System controls the blower speed between 5% and 100%, using a power converter with a control switching frequency of over 20kHz. More

How does IMV’s ECO System save energy and money?

Conventional shaker systems set the field power and blower speed to the nominal settings as soon as the system is started. Only the armature power is varied according to the force required for the test. More

Why is IMV’s ECO System so quiet?

In minimizing the energy used by IMV’s ECO-shaker to run any particular test, then the cooling requirement is also minimized. Not only does this save energy, but it also means that for most tests, the ECO System is quiet. More

IMV ECO System – High shock velocity

Where a test requires a high shock velocity, traditional shaker systems use a matching transformer to achieve the necessary higher armature voltage. More

Can the IMV ECO Technology be used for water-cooled shakers?

This technique is equally applicable to water-cooled shakers and IMV offers its range of ECO Systems for both air-cooled and water-cooled shakers. More

Advanced service support – Maintenance manager – IMV ECO System

IMV’s ECO System monitors up to 200 parameters, including for example power module operating conditions, system temperatures, interlock status, controller status, 3-phase supply conditions and so on. More

IMV ECO System – I prefer my existing controller, do I need to use IMV’s K2 controller?

IMV’s advanced K2 controller has been proven in the most extreme control environments, from single axis, single-point control through to simultaneous multi-axis, multi-point control. More

IMV ECO System – Traditional vibration test systems

Shaker systems have always been designed as individual components; amplifier, shaker, cooling fan, controller. More

IMV ECO System – But other shaker systems have an adjustable field?

Shaker systems that have the ability to vary the field power have long been used in vibration testing, with a typical option to set the field current to a level of 70% of the nominal value. More

The Worlds first fully automatic ECO vibration test systems – VIDEO

Reduce your carbon footprint – Upgrade your amplifier to get the complete set of benefits. Lower your noise emission. Save up to 80% on running costs. – Remote system diagnostics. More

31st Control – International trade fair for quality assurance – VIDEO

Control – Quality makes the difference – Production and test engineering – Industrial trade fair, 09.05.–12.05.2017, Messe Stuttgart More

Battery Day NRW and Advanced Battery Power 2017

The Battery Day NRW presents the products, services and achievements of companies and institutions in NRW which are active in the battery technology and application market. More

Intelligent shaker manager – Energy saving test system

Due to the great contribution to the promotion of efficient use of energy, the technology of ECO-Shaker received the Chairman's award from The Machinery Federation in 2012. More

IMV successfully launch their new A65 Vibration test system at the Automotive Testing show

The A65 can also be purchased with IMVs award winning ECO Technology that enables customers to save energy and reduce carbon emissions. More

Electrodynamic vibration test systems A-series in Stuttgart's Automotive Testing Expo 2016

IMV Corporation, the world 's leading electrodynamic vibration test systems manufacturer introducing newly launched 30kN and 60kN A series shaker in Automotive Testing Expo 2016. More

IMV 's A-series vibration test system debuts in the Europe

THP Systems Ltd announced the UK (Letchworth) release of the world leading A-series vibration test system product line from IMV Corporation. More

Single axis, high grade range vibration test system A-series

IMV single axis shaker A series – Electrodynamic vibration test system – A new standard created by listening to our customers. A wider range of test requirements and higher test specifications. More

NSC have invested in IMVs ECO technology – 54kN Combo vibration test system

Nacelle Systems Consultancy Ltd (NSC), UK chooses IMV Corporation for the supply of a 54kN Combo vibration test system to be installed in their Newry, N.I. test facility. More

The new, extremely silent family of noise free shakers – SAREX (Squeak And Rattle Exciter)

Noise excitation is very important for checking the noise quality of vehicle components or complete vehicles. We measure stress scenarios at a reasonable price and with competence for any vehicle component. More

Installation of an IMV ECO Shaker at Bosch in Cluj-Napoca

An energy saving ECO-Shaker from the range of Japanese IMV brand has been selected and installed for our multinational client engaged in the manufacturing of electronic automotive devices. More

What difference do the low-energy ECO shakers make in terms of energy consumption?

ECO shaker offers energy savings up to 80% depending on the load under which the equipment is operated. The smaller the load, the more energy can be saved compared to a conventional dynamic test equipment. More

IMV opens a new UK Manufacturing Centre to support its European Expansion strategy

IMV has opened a new Manufacturing Centre, with full test capabilities, in Shepreth, Cambridgeshire. The Centre represents a substantial investment in IMV’s operations outside of Japan and will underpin its ongoing European growth strategy. More

Cutting edge Technology for 10000Hz High Frequency

As Hybrid electric vehicles (HEVs) have become a practical choice for consumers, the trend in automotive development is changing from “engine” to “electric motor”. Optimised 10kHz vibration testing. More

K2 Vibration Controller – Test time reduction with IMV’s multi-axis testing and K2 Multi-Sweep Sine

Two growing demands in vibration testing are more realistic testing (test realism) and shorter test times. IMV’s K2 controller and advanced vibration test systems support both these global trends. More

Optimized battery vibration tests

As electric and hybrid vehicles grow in popularity, the new systems they implement require new test techniques. More

IMV release K2 Vibration Controller Guide with details of troubleshooting and remedies

easy-to-read instructions for the K2 Vibration Controller – technical details, extensive information on hardware and software and the possible applications of the Controller More

IMV’s energy saving vibration system with high shock vibration power modules

IMV is a leading manufacturer of electrodynamic (ED) vibration simulation systems and IMV’s ECO‐Shaker automatic energy‐saving vibration test systems have been installed by many major automotive manufacturers including Honda and Nissan. More

What is the aim of vibration and shock testing?

In order to design and construct more reliable products, it is highly recommended that vibration and shock tests be incorporated in sample or finished product tests. More

Innovative Technology – Hybrid Vibration Test System

While the majority of global vibration test equipment manufacturers continue to produce vibration systems in the traditional way, IMV leads the global industry thanks to its revolutionary world-first Hybrid shaker technology. More

Emphasised service of the IMV brand service

Are you ready for environmental-friendly technologies? IMV's energy conserving ECO-Shaker technology is also available via the refurbishing / upgrading of existing vibration systems. More

Energy Saving Type Vibration Simulation System – VIDEO

The IMV ECO-shaker technology enables maintaining automatically the possible lowest power consumption and noise pollution - and hence environmental load - of the system, always adjusted to the momentary power requirements. More

Pioneer solution in energy efficient and dynamic test systems

To develop or invent industrial products with high reliability, measurement results can be used to feed back into product design. More

Vibration test systems integrated in climate chambers

Everything you may need for the environment simulation testing of products. Vibration test system, test chamber, test fixtures, self-designed and constructed testing equipment, test grippers. More

ECO upgrading of existing vibration systems – IMV authorized eco-friendly services

Reduce your Carbon Footprint. Save up to 80% on your running costs. Low your noise emissions. Improve your working environment. IMV's ECO-Shaker technology is also available via the refurbishing / upgrading of existing vibration systems. More

Replacement to ECO amplifier – special services

IMV have announced a further expansion of our ECO range of Electro-dynamic test Solutions by offering customers with existing Vibration equipment the opportunity to upgrade their test systems. More

Energy Saving Vibration Simulation System – EM series

The ECO-shaker technology developed by IMV and used in the ISM automatically minimizes the system’s power consumption and noise level (thus its environmental impact) according to the current performance need. More

Energy Saving Vibration Test System – Products and Services

IMV Corporation was the first to produce an energy efficient shaking system in the world. The intelligent shaking head manager (ISM) reduces both carbon-dioxide emission and power consumption. More

What is vibration? – What is the need for vibration measurement?

Measuring vibration. What can we find out by measuring vibration? 
Let's find out the significance of vibration. More

What is vibration? – Generating vibration and vibration testing

Why do we need artificial vibration generation? 
Let's learn purposes and importance of vibration testing. More

The IMV authorized eco-friendly services – Replacement to ECO amplifier

IMV have announced a further expansion of our ECO range of Electro-dynamic test Solutions by offering customers with existing Vibration equipment the opportunity to upgrade their test systems. More

IMV Corporation Products – Areas of Applications

Always developing vibration test systems - IMV dynamic simulation systems have been developed with "intelligence" in mind and endeavour to support customers testing. More

IMV System Category

Vibration tests have become diversified and specifications have become increasingly strict. Our offer a user-friendly lineup with enhanced performance and durability. More

IMV demonstrates the 24kN ECO-shaker in Stuttgart

IMV will demonstrate a 24kN air-cooled ECO-shaker that the visitors can experience running on the stand due to its unique, environmentally friendly ECO-technology. More

IMV at the Automotive Testing Expo 2012 in Stuttgart

IMV Corporation are pleased to announce a successful debut at the recent Automotive Testing Exhibition in Stuttgart. More