Air cooled vibration test systems, A22

A series is the “new standard” in vibration testing, with a solid test performance. – A22/SA2HAM and A22/EM2HAM. Test systems provides a maximum of 3.5m/s shock velocity testing. More

Air cooled vibration test systems, A12

A series is the “new standard” in vibration testing, with a solid test performance. – A12/SA1HAM and A12/EM1HAM. A series gives good balance between specification of velocity, acceleration and displacement. More

IMV Direct Coupling

IMV’s Direct Coupling top cover can work with any test chamber. More

Automotive Testing Expo Europe 2018 - 20th anniversary

5 / 6 / 7 June 2018, Halls 8 + 10, Messe Stuttgart, Germany - Automotive Testing Expo Europe - Bigger and better, with more new technology than ever before! More

Latest addition to IMV’s A series supports manufacturers – A74

In 2016 the number of electric cars on the planet topped 2 million, with sales leaping 60% on the previous year. More

Mechanism of vibration test systems

For the vibration test systems, the vibration generators correspond to the loud speakers of the audio systems. They have the vibration controllers instead of the sound source to drive the vibration generators. More

IMV Distributors meet at a conference in Bergamo

Business results and future projects were discussed by IMV staff, Amtest-TM and 44 distributors from all over Europe at a conference in Bergamo, Italy, in mid-October. More

How does the IMV ECO System adjust the field power?

The IMV ECO-system controls the field current between 0% and 100%, using a power converter with a control switching frequency of over 20kHz. More

How does the IMV ECO System adjust the cooling blower speed?

The IMV ECO System controls the blower speed between 5% and 100%, using a power converter with a control switching frequency of over 20kHz. More

How does IMV’s ECO System save energy and money?

Conventional shaker systems set the field power and blower speed to the nominal settings as soon as the system is started. Only the armature power is varied according to the force required for the test. More

Why is IMV’s ECO System so quiet?

In minimizing the energy used by IMV’s ECO-shaker to run any particular test, then the cooling requirement is also minimized. Not only does this save energy, but it also means that for most tests, the ECO System is quiet. More

IMV ECO System – High shock velocity

Where a test requires a high shock velocity, traditional shaker systems use a matching transformer to achieve the necessary higher armature voltage. More

Can the IMV ECO Technology be used for water-cooled shakers?

This technique is equally applicable to water-cooled shakers and IMV offers its range of ECO Systems for both air-cooled and water-cooled shakers. More

Advanced service support – Maintenance manager – IMV ECO System

IMV’s ECO System monitors up to 200 parameters, including for example power module operating conditions, system temperatures, interlock status, controller status, 3-phase supply conditions and so on. More

IMV ECO System – I prefer my existing controller, do I need to use IMV’s K2 controller?

IMV’s advanced K2 controller has been proven in the most extreme control environments, from single axis, single-point control through to simultaneous multi-axis, multi-point control. More

IMV ECO System – Traditional vibration test systems

Shaker systems have always been designed as individual components; amplifier, shaker, cooling fan, controller. More

IMV ECO System – But other shaker systems have an adjustable field?

Shaker systems that have the ability to vary the field power have long been used in vibration testing, with a typical option to set the field current to a level of 70% of the nominal value. More

The Worlds first fully automatic ECO vibration test systems – VIDEO

Reduce your carbon footprint – Upgrade your amplifier to get the complete set of benefits. Lower your noise emission. Save up to 80% on running costs. – Remote system diagnostics. More

Automotive Testing Expo Europe 2017

Bigger and better, with more new technology than ever before! Automotive Testing Expo Europe will once again run at the Messe Stuttgart and will feature record numbers of exhibitors. – 20-22 June 2017, Hall 1, Stuttgart, Germany More

3-axis electrodynamic test systems – New in Europe

The technology described here has already been used in many sites in Japan and more widely in Asia with more than 200 installed systems. This 3-axis technology is the workhorse of the Japanese automotive industry. More

Intelligent shaker manager – Energy saving test system

Due to the great contribution to the promotion of efficient use of energy, the technology of ECO-Shaker received the Chairman's award from The Machinery Federation in 2012. More

New software supports vibration tests with non-Gaussian distribution

The purpose of the non-Gaussian method is to adapt the signals used for excitation in the lab to real-life conditions as much as possible in order to obtain identical stress. More

IMV successfully launch their new A65 Vibration test system at the Automotive Testing show

The A65 can also be purchased with IMVs award winning ECO Technology that enables customers to save energy and reduce carbon emissions. More

Electrodynamic vibration test systems A-series in Stuttgart's Automotive Testing Expo 2016

IMV Corporation, the world 's leading electrodynamic vibration test systems manufacturer introducing newly launched 30kN and 60kN A series shaker in Automotive Testing Expo 2016. More

Automotive Testing Expo Europe 2016, Stuttgart

Bigger and better, with more new technology than ever before! Automotive Testing Expo Europe 2016 will once again run at the Messe Stuttgart and will feature record numbers of exhibitors. (31 May – 2 June) More

IMV 's A-series vibration test system debuts in the Europe

THP Systems Ltd announced the UK (Letchworth) release of the world leading A-series vibration test system product line from IMV Corporation. More

Single axis, high grade range vibration test system A-series

IMV single axis shaker A series – Electrodynamic vibration test system – A new standard created by listening to our customers. A wider range of test requirements and higher test specifications. More

NSC have invested in IMVs ECO technology – 54kN Combo vibration test system

Nacelle Systems Consultancy Ltd (NSC), UK chooses IMV Corporation for the supply of a 54kN Combo vibration test system to be installed in their Newry, N.I. test facility. More

CEJN AB invest in an IMV Corporation 3kN Vibration System

IMV Corporation are pleased to announce that they have been selected to supply an i210/SA1M high performance Vibration Test System to CEJN AB, Sweden More

IMV awarded AMtest-TM with the "Most advanced distributor in Europe" 2015 award

Amtest is one of the most succesful sales and service partners of IMV in Europe. More

IMV 30kN, simultaneous 3-axis shaker system installed and operating in Bertrandt's TestLab – VIDEO

IMV Corporation are the leading provider of Electrodynamic Vibration Test equipment and can offer a comprehensive range of solutions including both Multi Axis and traditional single axis test systems. More

Automotive Testing Expo Europe 2015

International Exhibition for Automotive Test, Evaluation and Quality Engineering, 16. – 18.06.2015, Messe Stuttgart More

Installation of an IMV ECO Shaker at Bosch in Cluj-Napoca

An energy saving ECO-Shaker from the range of Japanese IMV brand has been selected and installed for our multinational client engaged in the manufacturing of electronic automotive devices. More

Installation requirements air-cooled vibration systems from IMV

Installation requirements vibration systems: power supply, pressure air supply, environment, sables and hoses, preliminary work, additional points that might be relevant during the planning and should be considered More

What difference do the low-energy ECO shakers make in terms of energy consumption?

ECO shaker offers energy savings up to 80% depending on the load under which the equipment is operated. The smaller the load, the more energy can be saved compared to a conventional dynamic test equipment. More

Conditions for installation of IMV air-cooled vibration test systems

Shaking tests require a 3-axis vibration profile and 3 axial fixture. The lowest test frequency would be 1 Hz. What are the conditions for installation of vibration test systems? More

IMV opens a new UK Manufacturing Centre to support its European Expansion strategy

IMV has opened a new Manufacturing Centre, with full test capabilities, in Shepreth, Cambridgeshire. The Centre represents a substantial investment in IMV’s operations outside of Japan and will underpin its ongoing European growth strategy. More

K2 Vibration Controller – Test time reduction with IMV’s multi-axis testing and K2 Multi-Sweep Sine

Two growing demands in vibration testing are more realistic testing (test realism) and shorter test times. IMV’s K2 controller and advanced vibration test systems support both these global trends. More

Optimized battery vibration tests

As electric and hybrid vehicles grow in popularity, the new systems they implement require new test techniques. More

IMV’s energy saving vibration system with high shock vibration power modules

IMV is a leading manufacturer of electrodynamic (ED) vibration simulation systems and IMV’s ECO‐Shaker automatic energy‐saving vibration test systems have been installed by many major automotive manufacturers including Honda and Nissan. More

What is the aim of vibration and shock testing?

In order to design and construct more reliable products, it is highly recommended that vibration and shock tests be incorporated in sample or finished product tests. More

Energy Saving Type Vibration Simulation System – VIDEO

The IMV ECO-shaker technology enables maintaining automatically the possible lowest power consumption and noise pollution - and hence environmental load - of the system, always adjusted to the momentary power requirements. More

Emphasised service of the IMV brand service

Are you ready for environmental-friendly technologies? IMV's energy conserving ECO-Shaker technology is also available via the refurbishing / upgrading of existing vibration systems. More

Innovative Technology – Hybrid Vibration Test System

While the majority of global vibration test equipment manufacturers continue to produce vibration systems in the traditional way, IMV leads the global industry thanks to its revolutionary world-first Hybrid shaker technology. More

IMV 6DOF Simultaneous Multi-Axis Test System

The System from IMV will be used to test a wide range of Automotive interior parts, from components up to full Instrument panels and seat assemblies. More

Pioneer solution in energy efficient and dynamic test systems

To develop or invent industrial products with high reliability, measurement results can be used to feed back into product design. More

Vibration test systems integrated in climate chambers

Everything you may need for the environment simulation testing of products. Vibration test system, test chamber, test fixtures, self-designed and constructed testing equipment, test grippers. More

Versatile Test Line up for Medical Equipment, MV Shaker – M series

Vibration testing can be combined with a chamber to evaluate expose parts and rapid temperature variation, commonly used in the pharma, automotive and aerospace industry. More

Compact Vibration Test Systems PET series

Vibration test systems suitable for a variety of bench pad tests including laboratory equivalent test conditions. More

Wide Frequency Band Type Vibration Test Systems VSH series

Space-saving vibration test systems suitable for performing bench pad tests. More

IMV Vibration Test Systems – Compact Type – Product list

Compact, versatile, space-saving stationary vibration test systems More

Vibration test system combined with climate chambers – Product List

Industrial products are exposed to environmental impacts, which are climate and physical environmental impacts. These are not separately impacting, but in intricately intertwined way as a combined stress. More

IMV Multi-Axis Vibration Test Systems – Product category

Multi Axis Vibration Test Systems is mainly used for "Reproduce More Realistic Vibration" as a goal. More

IMV Single-Axis Vibration Test Systems – Product category

Vibration tests have become diversified and specifications have become increasingly strict. We offer a user-friendly lineup with enhanced performance and durability. More

Energy Saving Vibration Test System – Products and Services

IMV Corporation was the first to produce an energy efficient shaking system in the world. The intelligent shaking head manager (ISM) reduces both carbon-dioxide emission and power consumption. More

What is vibration? – Fundamental concept of vibration

Have a look at the unknow world of vibration – Fundamental concept of vibration. Why does vibration happen? 
Why do you need vibration measurement? More

The IMV authorized eco-friendly services – Replacement to ECO amplifier

IMV have announced a further expansion of our ECO range of Electro-dynamic test Solutions by offering customers with existing Vibration equipment the opportunity to upgrade their test systems. More

IMV System Category

Vibration tests have become diversified and specifications have become increasingly strict. Our offer a user-friendly lineup with enhanced performance and durability. More

IMV Corporation Products – Areas of Applications

Always developing vibration test systems - IMV dynamic simulation systems have been developed with "intelligence" in mind and endeavour to support customers testing. More

Service team qualifications

Our service group regularly takes part in service trainings organized by represented manufacturers, moreover our experts' EU qualified knowledge complies with both national and European regulations. More

Failure notification with service request

Amtest Service's experts are always close wherever you need them. More

Amtest Service Excellence

Amtest Service Excelence service contract provides effective and uninterrupted operation of your test equipment. It provides immediate availability to Amtest Service Centre and responsible service engineer. More

System integration, commissioning

Our qualified experts, years of experience and our company's quality assurance system guarantee that we provide services on the highest level, using the most modern equipment and methods. More

Testing equipment for rent – Environmental test chambers and shakers

You can make the decision making process of your developers and investors easier, facilitate sales agents' business activities and earn your customers' trust. Take a look at the list of our test equipment available to let (download data sheets). More

AmtestLab – Product testing

The Amtest-TM laboratory performs environmental simulation tests. Products are tested for reliability and quality in almost all product categories. More

Used test equipment trade – purchase – sale

List of AmtestLab's second-hand test equipment for sale More

About us

Our company is in the business of distribution of high-precision measuring instruments and testing equipment in the Central European region. More

The celebration of our success. Amtest references.

Amtest celebrates 15th anniversary. We thank our customers and partners for choosing us and relying on our expertise. More

IMV shakers - New sales channel in Europe

THP Systems Ltd announces expansion of IMV Sales Channels in Europe. More